Nail Care Natural shining nails
Naturally shining nails
If you want to keep natural, TEM-KI will fulfill your wish: natural color, elegance, shine, absolute refinement.
The natural shine of the nails is obtained thanks to the “mirror-polish"
Thanks to its vibrations and its foam head, TEM-KI will polish your nails with 3 abrasive discs of different grains, which will eliminate the different levels of roughness (not visible at the naked eye) until you get a perfectly smooth and polished nail. This is called the "mirror-polish". Rest assured, the thickness removed is very small and will not cause any damage to your fingernail.
Nail care with TEM-KI NAILS
Prepare your TEM-KI NAILS
Always hold the TEM-KI behind the vibration absorber (blue rubber).
Make a mirror-polish for an exceptional natural shine.
Achieving a mirror-polish on your nails is easy and is done in three steps:
1) First, apply the “Nails" disc # 1
Preliminary remark: if you have already passed the "Nails" disc # 1 when removing cuticles and ridges (see page "nail care"), it is no longer necessary to do so. You can go to step 2. For others, read below.
Install the "Nails" disc # 1 on the foam head. Apply the TEM-KI on your fingernail, with light pressure so that the foam head adapts to the shape of your fingernail. You start at the base of the nail and go to the tip by doing back and forth movements and from left to right. You repeat this operation 3 to 6 times, making sure to cover the entire surface of the nail.
After each pass, remove the dust with a soft cloth. Put your finger on the nail to check the work already done.
- On nail work, the TEM-KI must always be in motion, never stand still.
- Always start at the base of the nail and always move up to the tip of the nail.
- After each pass, remove the dust from your nails with a soft cloth and check the work done.
2) Next, apply the "Nails" disc # 2
Remove the "Nails" # 1 disc, making sure to hold the foam with your thumb.
Install the "Nails" disc # 2 and start polishing each nail again. Again, apply a slight pressure so that the foam head fits the shape of your fingernail and make 3 to 6 passes per nail. The dust generated will be less than with the disc # 1 but still remove it once it appears.
3) Finish with the disc "Nails" # 3
Even if you feel that your nails are already very smooth, there is still a roughness invisible to the naked eye. We will eliminate it with the disc "Nails" n ° 3 to obtain a mirror-polish, essential condition for a natural shine as you never imagined.
The procedure remains the same: you install the "Nails" disc # 3, you polish from the base to the tip of the nail.
As the grain of the disc # 3 is very thin, you can press the TEM-KI a little more on your nail and you can also take more time. The dust generated will be very small but remove it also once it appears.
Sparky shine with your nail buffer
Wash your hands to remove all the dust, dry them.
Pass your usual nail buffer on each nail. Some passages will suffice for absolute brilliance.
A long-lasting effect
Before being marketed, we conducted many tests and we found that the nails worked with TEM-KI remained polished despite household chores. The shine may fade but will be reactivated with some passages of your nail buffer.
It is thanks to the mirror-polish made with TEM-KI Nails that your nail buffer will be more effective.
You can achieve today the mirror-polish and apply 8 days later your nail buffer, you will be surprised!
And the toenails?
It's the same job for toenails. After passing discs # 2 and # 3, wash your feet. Dry them and then, on each nails pass your nail buffer.